I've re-arranged my priorities and the one project that has now bubbled to the surface is the GDuP board. I need to make a two board proto so I can have PC access to the uP. The uP board needs a space for a dual row header so the debugger can be plugged into it allowing code development.

I just got confirmation that the rocket ship has been shipped. When you see the board you'll know what I mean. It's a 10mm board with a Rebel footprint in the middle. It's a thin PCB with vias for good thermal transfer. You solder on the Rebel to the thin PCB and then glue on the thin PCB to your heat sink.

On the list of things todo are a flower Rebel using the 10mm diameter footprint to match the 10mm reflector that Don has made for the Rebel LED.